Concretech Infra Solutions, based in Mandya is a manufacturer of Precast Prestressed Concrete products and associated services to highway, utility, site development and home construction markets all over India.
Contact Info
- Mandya,Karnataka
- +91 91646 07000
- contact@concretechinfra.com
Manufacturers of Precast Prestressed Compound Walls
Block Joint Mortor
Block Joint Mortor
Block Joint Mortor is is a ready to mix and use, self-curing cementitious mortar for laying of AAC, CLC bricks, hollow concrete blocks and bricks. It’s a factory-made dry mixed mortar blended with carefully selected raw materials such as graded sand, mineral binders and ordinary Portland cement (OPC) in combination with selected polymeric additives which help in providing mechanical bond and adhesion between block and block to a surface. Designed for use with water to produce high strength thixotropic mortar that meet and exceed the requirements of National and International Standards.
Designed for internal floor & wall applications
High Strength
Self Curing, Impact resistant &vibration resistant
Flexible & Improved Workability
Long working time
Construction Accuracy
Fast Construction and Higher Productivity
Withstand Hammering and Chiseling
Improved adhesion between two blocks
Economical
Grey, Coarse and free flowing Material
Depending on the thickness to be applied, the mixing ratio of powder: water will vary from 1:0.20. Water is to be added in stage to get a smooth, uniform, workable mix. Allow ample time for initial mixing.
3 – 4 mm
3-4 hrs
24 Hrs
> 5.0 MPa(ASTM C 1660)
> 0.34 MPa(ASTM C 1660)
160 – 180 sft. / 50 kg @ 3 – 4 mm thickness for 100 blocks Vary on Surface and absorption of blocks
50 Kg Bag
Factory sealed bag of this product is guaranteed for first quality for 6 Months * if stored up in dry area
Highly Suitable to AAC Blocks
Cement mortar blocks & bricks
Fly ash made bricks